Here’s a simple guide to get started with your HYZO HA 35 Cutting Plotter and make the most of its advanced features.
✅ Step 1: Unpacking and Setup
- Unbox the machine carefully and place it on a flat, stable surface.
- Connect the plotter to a power source.
- Ensure all accessories
✅ Step 2: Power On and Initial Setup
- Press the Power Button to turn on the machine.
- The 5×10 Touchscreen Display will light up, guiding you through the initial setup.
- Connect the plotter to your computer using USB, Wi-Fi, or UDisk.
✅ Step 3: Loading the Sheets
- Place up to 150 sheets in the Auto Feed Tray.
- Adjust the vacuum system to keep the sheets securely in place.
- Ensure the sheets are aligned properly to avoid shifting during the cutting process.
✅ Step 4: Designing Your Cut File
- Open Sign Master Software on your computer.
- Create or upload your design file.
- The software supports various formats like SVG, AI, PDF, and DXF.
- Set your cutting marks for the AI Camera to detect.
- Configure the cutting force and speed according to the material type:
- Cutting Force: Up to 500 grams.
- Speed: Up to 120 cm/sec.
✅ Step 5: Sending the Job to the Plotter
- Once your design is ready, send the job to the plotter via USB, Wi-Fi, or UDisk.
- The AI Camera will automatically read the cutting marks to ensure accuracy.
✅ Step 6: Cutting Process
- Press the Start Button to begin the cutting process.
- The plotter will automatically feed the sheets and process them at a speed of 400 sheets per hour.
✅ Step 7: Collecting Finished Sheets
- The Output Tray will neatly collect the finished sheets after cutting.
- Inspect the cuts to ensure they meet your requirements.
✅ Step 8: Maintenance Tips
- Clean the vacuum bed regularly to avoid dust buildup.
- Check the blade condition and replace it as needed.
- Keep the software updated for optimal performance.
💡 Pro Tips for Best Results:
- Always perform a test cut before running a large job.
- For precise results, ensure the AI Camera is properly calibrated.
