How to Use HYZO FLATBED : Step-by-Step
1. Initial Setup
A) Placement and Connection:
- Place the machine on a flat, stable surface that can support its weight (104 kg).
- Ensure there is sufficient space around the machine for easy operation.
- Connect the machine to a power outlet using the provided power cable.
- If using USB or U-disk, plug them into their respective ports on the machine.
B) Powering On:
- Turn on the machine using the power switch.
- Verify that the 11 cm LCD touch screen displays the main menu.
2. Preparing Materials for Cutting
A) Material Selection:
- Select the material to be cut (paper, vinyl, PVC, PU, TPU, or HTV), ensuring its thickness does not exceed 8.0 mm.
B) Loading the Material:
- Place the material on the cutting surface, ensuring it is aligned properly.
- Use the vacuum system (750W) to secure the material in place for stability during cutting.
C) Installing the Blade:
- Choose the appropriate blade from the three included in the kit.
- Mount the blade in the holder and ensure it is securely fastened.
3. Setting Up the Design and Data for Cutting
A) Connecting the Machine to Your Computer:
- Connect the machine to your computer using the USB cable or via U-disk.
B) Opening SignMaster Software:
- Launch the included SignMaster software.
- Use the software to create or import the design you wish to cut.
C) Adjusting Cutting Settings:
- Set the cutting parameters:
- Cutting Speed: 1200 m/s.
- Cutting Force: Up to 1000g.
- Memory: Save cutting data in the 1GB RAM if repeating the same design.
D) Sending the Design to the Machine:
- Once the design is ready, send the data to the machine through the software.
4. Starting the Cutting Process
A) Confirm Settings:
- Verify the cutting settings on the touch screen.
- Use the touch screen to initiate the cutting process.
B) Monitor the Process:
- Observe the cutting process via the LCD screen.
- Ensure the material remains stable and the blade operates smoothly.
5. Removing the Finished Material
- After cutting is complete, turn off the machine.
- Carefully remove the cut material from the surface.
- Clean the cutting area of any residual debris.
6. Maintenance and Cleaning
- Clean the machine after each use with a dry cloth.
- Regularly check the blades and replace them if they become dull.
- Ensure the vacuum and stabilization systems are clear of any obstructions.
Additional Tips:
- Test with small pieces of material to confirm the settings before starting a large project.
- If you’re a beginner, start with lower cutting speed and force to prevent damage to the material.
- Keep the SignMaster software updated for improved features and performance.
